Throttle Plate & Intake Cleaner

Before

THROTTLE PLATE & INTAKE CLEANER

After

3M™ Throttle Plate & Intake Cleaner

	For professional use only
	Oxygen sensor - safe, through the engine cleaner
	Designed to penetrate, loosen and flush away varnish, oil and gum deposits
	May be used to clean throttle & carburettors when the engine is running
	leaves no residue on external surfaces and will burn completely when run through the engine
	Unique formulation to clean throttle plates of new generation cars
	Cleans throttle plates, automatic chokes, linkages, PCV valves and carburettors
	Fast cleaning action for dirty throttle plates
	Cleans & lubricates
	Can be used on cold, warm and running engines
	meets requirements of 75% VOC rule

Directions For Use

	Turn engine off
	Remove air intake boot at the manifold
	Place a cloth under the throttle valve and air intake opening
	Hold can upright and push actuator all the way down to apply uniform spray
	If using the extension tube, insert it into the actuator using twisting motion
	Apply cleaner to both sides of throttle plate and surrounding area by spraying or wiping with a cloth dampened with 3M™ Throttle Plate & Intake Cleaner
	Allow cleaner to work for 10-20 seconds.
	Repeat spraying or wiping to remove softened deposits
	Repeat cleaning as necessary
	Clear intake manifold of cleaner fumes by blowing air into the intake manifold or allowing the car to remain for a few minutes with the throttle plate wide open
	This will reduce the possibility of a backfire when the car is started
	Best results are obtained when material is at room temperature
	Attach air intake boot and run the car

Customer Support

	Where to Buy
	Contact Us

Sorry, this item Requires Adobe Flash Player.

Please Note:
Adobe® Macromedia Flash Player 7.0 or higher is required to view Flash.